• Insured
  • Certified
  • Licensed
  • 24/7 emergency service
  • 100% guaranteed work
  • Professional technicians
  • Certified Amana/Goodman Dealer
  • Environmentally conscious
  • Up-front pricing
  • Written Estimates
  • No charge for travel time
  • Financing available
 

Category: heating repair

Experts in Heating Repair – Tomball, Spring, and Beyond

There are plenty of experts in heating repair in Tomball, Spring, and the whole Houston area, but sometimes, you want to do something yourself. Your heating unit is usually quiet and efficient, running in the background, warming or cooling your home without fuss or noise — but that just makes it that much more stressful when it fails. Mercifully, there are steps you can take to avoid the stress of such an event happening right when you need it the most.

Regular maintenance can not only keep it running and keep you at the right temperature, but it can save you money in the long run by avoiding major breakdowns and replacements. A malfunctioning heater or air conditioner can even put your home in danger if leaking fuel or chemicals or faulty electrical or natural gas connections occur.

Regular Maintenance
In almost all circumstances, you should call a heating and AC repair Tomball professional if you believe that your heater or AC unit require repair — they’re quite complex devices, after all. At least once a year, a professional should come in and examine your unit(s), giving them a full clean and lube, tightening connections and checking settings and controls to make sure everything is functioning properly. This will aid in preventing a huge breakdown at an inopportune moment. Be sure to schedule this inspection during the spring or fall — the less-busy seasons for heating and AC repairmen.

Doing It Yourself
That said, there are things that you can do once each month all year round to keep your heater and AC running effectively and to avoid an expensive repair bill. Before you do anything to your HVAC units, be sure to disconnect the power. Once you’ve done that, remove, clean, and replace the filter. A blocked filter prevents the unit from operating efficiently and can also shorten the unit’s functional lifespan. Run the filter under warm water to clean it. If you have filters away from the unit, replace them monthly as well, and clean the ductwork every six months as well. Also, every six months, go around and make sure that no casual movements of drapes, furniture, or other objects have blocked any vents.

Troubleshooting
Before your call your local Tomball AC repairman, check the power source on your air conditioner. Look for burnt or shorted cords and plugs, blown fuses, tripped circuit breakers, and make sure that the unit is properly turned on. Many, many people have been embarrassed and paid significant fees for calling out a repairman only to have him flip a switch, collect his money, and leave.

How to Get Good Heating Repair in Spring Texas

Getting good heating repair in Spring, Texas is a matter of making sure that you’ve done everything you can yourself, and then getting a company that can do the rest quickly, inexpensively, and well. Furnaces are inherently dangerous appliances, but with a little care and some knowledge aforethought, you can do several things to make your heater repair bill as minor as possible.

First: preventative maintenance.

Every month, change your filter. Wait for your specific make and model’s filter to go on sale, and buy a load of them at once, and keep them in a closet somewhere. If replacing your filter is hard work because the cover grate is a pain in the butt to take off, your local hardware store can sell you an easy-change replacement grate fairly easily.

Every few months, check your ductwork to make sure it’s all clear. Ductwork joints are surprisingly fragile and fail easily. One moment it’s all good, the next, the duct tape has given out and you’re blowing hot air into your attic. Once you’ve established that it’s all good, check to make sure that nothing is blocking your heater’s air intake as well.

Second: basic repairs.

If your furnace won’t come on, start with your thermostat. Is it set to ‘auto’? Do you have an older thermostat that might have mechanical problems? Switching to a digital thermostat is generally a good idea, doesn’t cost that much, and is pretty easy to do on your own. It will only set you back about $35, and the installation instructions they come with generally are complete enough that you won’t have much problem with them.

If it’s not the thermostat, check your fuses and/or circuit breakers. If they’re blown and/or tripped, carefully replace or reset them, but keep an eye out, because if there is an electrical problem with your heater that caused them to go in the first place, it might happen again within moments of the unit turning on.

If there’s power going to the unit, the next thing to check is the blower. Blowers are known to fail relatively often. Blowers generally look like a cylinder or a drum with fins on it to catch and propel the air. Sometimes a look inside with a flashlight will illuminate something that is jamming the blower — other times, you’ll able to that’s come entirely off of it’s rotor and it’s ruined.

If you can reach in and turn the blower by hand and it doesn’t obviously look stuck, you might have a busted ball bearing in the blower’s shaft. Be careful reaching in to turn it, however — those fins can be sharp!

Regardless, once you’ve done that, you’ve basically done as much work as you can to find the problem. It’s time to call your local expert heating repair Houston businesses and have a professional come out and resolve your issues.

Getting Quality Heating Repair: Houston And Surrounding Areas

No matter where you go, it can be tough to get quality heating repair; Houston to Dallas to Nome, Alaska, there’s just a lot of chaff you have to sort through to get to the good repairmen. Whether it’s for an emergency job or a routine checkup, getting the right man to do the job is critical — and they’re far from identical.

When you start looking for an heater repairman (or repairwoman, of course,) start with your warranty. Many if not most allow any licensed company to come in and do repairs; others require you to pick from a narrow list of preferred service providers. (You’ll notice that most heater repairfolk also do AC repair, Houston, so keep tabs on your final choice year-round.)

Once you’ve established who your warranty will allow you to call, it’s time for a little more research. First, note the make and model of your heater, and keep it on hand when you’re calling or clicking around. Ideally, you’ll find a local, trusted company like Ambient Heating and Cooling, which serves Houston, Spring, Tomball, and the surrounding areas.

Then, you need to ask them a few critical questions if they don’t already have the answers laid out on their website. Are they bonded (aka insured)? Do they have experience with your specific make and model? What do they charge for coming out and looking around?

One question to ask that’s very important: are they available 24/7? In Houston, if they aren’t, you could end up suffering through some very long, very hot nights if they aren’t. Even worse, if they don’t do weekends, it could be even longer.

Finally, ask them if they can put you on a regular maintenance plan, where they come out twice a year (Spring and fall — yeah, yeah, bad joke) and perform a checkup on your heater and, if they handle them, your AC unit as well. Such regular checkup might seem unnecessary up front, but it will eventually save you a lot of money in the long run, as you’ll require much less emergency repair. Some companies even offer discounts on emergency repairs to those clients that are on a program of regular checkups, making this option even more viable.

If you can find a company that can answer those questions to your satisfaction and is allowed by your warranty, you’ve found quality heating repair, Houston — don’t let them get away from you!

  Copyright 2009, Ambient Heating & Cooling, LLC. | All rights reserved.